Lehman 12
Standard Description
Hull
The hull is 100% hand laid up fiberglass. A high gloss gel coat is used
on the outside. Two fiberglass stringers are bonded to the inside of the
hull to strengthen the boat and provide footing for the skipper and crew.
Fiberglass bow and stern floatation tanks are also bonded to the hull.
Rails, Seat, & Mast Partner
The rails, the center seat, the cap to the daggerboard well and the mast
partner are molded in one single piece. This piece is 100% hand laid up
fiberglass and is bonded to the hull.
Standard Color
The standard color of the hull is white. The rails and seat are light
gray to minimize glare. The boot top can be either red or dark blue. A full
range of colors for the hull and waterline are available as options.
Hardware
Harken, Ronstan, and RaceLite are used throughout. Hiking straps are provided
for the skipper and crew. The boom vang is led aft and a 2:1 outhaul, a
cunningham, and a "mast puller" are standard.
Rudder, Tiller & Daggerboard
The rudder, tiller, and daggerboard are anodized aluminum. A 23" tiller
extension is standard.
Spars & RIgging
The mast and boom are silver anodized aluminum. Rigger's Choice wire is
used for the shrouds and forestay.
Standard Colors:
| Hull: |
White |
| Waterline stripe: |
Dark blue or red |
Options:
Custom colored hull
Painted club dolly with custom molded bunks
Custom Zeiman trailer
Prices and specifications are subject to change without notice. |